Page 4 of 17
Rudolf Dieselstraat 15A, Nijverdal, Nederland. +31 523 0613439. Mail: Info@ferlin.nl
This symbol indicates a prohibition.
This symbol indicates that respiratory protection must be worn.
This symbol indicates that safety glasses should be worn.
This symbol indicates that protective safety shoes are required.
This symbol indicates that protective gloves should be worn.
Before anyone is allowed to use or install the dosing unit, the operating instructions must be read
and understood. Qualified personnel working with the dosing unit must understand the function and
operation of the dosing unit and observe the associated safety and maintenance instructions.
Please note the following instructions when using the Ferlin One:
General:
• The company, which owns the FERLIN ONE, needs to guarantee that its co-workers working
with the FERLIN ONE are aware of the safety instructions and have read and understood the
safety instructions and manual.
• With the execution of maintenance near or with the FERLIN ONE the safety instructions and
the manual should be available for the co-worker.
• Any maintenance workings on or around the FERLIN ONE should only be executed by
technical educated co-workers.
• It’s prohibited to install the FERLIN ONE in an explosive dangerous environment.
• It’s prohibited to remove or manipulate the safety instructions or machine parts.
• The workplace in which the FERLIN ONE is installed should be executed with precautions
for good ventilation and co-workers must have the possibility to use breathing protective
gear.
• In case the FELIN ONE needs to be disconnected from the power supply please make sure
that the following actions
are taken care of:
o Press the “stop” button on the controller.
To Next Page
Loading...