Need help?Do you have a question about the Ferm TSM1032 and is the answer not in the manual?
Explains intermittent duty cycle for motor operation, specifying time limits to prevent overheating.
Describes measurement standards and preliminary assessment of exposure to vibration when using the tool.
Lists all items included with the saw bench, such as the user manual and safety instructions.
Defines symbols indicating risks like electrical voltage, personal injury, and the need for protective gear.
Checks and preparations required before operating the saw bench, including illumination and voltage verification.
Safe operating procedures and techniques for sawing, including workpiece handling and use of accessories.
Guidance on choosing and fitting the correct saw blade that meets European standard EN847.
Instructions on setting the saw bench for angled cuts up to a maximum of 45 degrees.
Details on connecting a vacuum cleaner to the saw bench for dust extraction.
Step-by-step guide for performing safe and effective sawing operations, including workpiece feed and support.
How to use the mitre guide for making diagonal saw cuts at a 45-degree angle.
Troubleshooting common issues like motor overheating, appliance not working, or uneven cuts.
Procedures for keeping the machine clean, including ventilation slots and housing.
Information stating that the device does not need any additional lubrication.
Guidance on contacting the service center for defects or worn-out parts.
Brief mention of environmental aspects related to the product.
To Next Page
General
