Fermax iloft - Page 62

Pag 22
Kit Halo & iLoftKit Halo & iLoft
Kit Halo & iLoftKit Halo & iLoft
Kit Halo & iLoft
Kit Halo & iLoftKit Halo & iLoft
Kit Halo & iLoftKit Halo & iLoft
Kit Halo & iLoft
- By Code:
1. Press the keys marked with a dot (except the bell key) sequentially from left to
right. The first key once, the second twice, the third 3 times and the fourth 4
times. If entered correctly, a long tone confirmation will be heard at the final
press, except in the first.
Administrator (Installer) Code
(1)
: 24797 (allows access to all menu options).
User Programming Code
(1)
: 19025 (lets you Add and Delete user cards).
(programmed previously)
Use the - keys to enter the digits corresponding to
the code and confirm each digit with the confirmation key
.
(1)
May be modified, please see corresponding chapter (option: 3.Codes) .
2. After this operation, the panel asks for a code.
You may enter Programming
by code
by master card
27 ºC 10:54
Programmer code:
_ _ _ _ _
- By Master Card (programmed previously, see corresponding chapter, option: 3.3 Prox. Master)
Programming MenuShow Master Card
27 ºC 10:54
27 ºC 10:54
To call press
Master
1.Users
2.Configuration
3.Codes
4.Timing
5.Message
6.Utilities
Beep beep beep
27 ºC 10:54
To call press
Beep beep beep beep
Key 4-> press 4 times
+ +
+
Key 1-> press once
Key 3-> press 3 times
+ +
Beep beep beep beep
Key 2-> press twice
Beep beep beep beep
+
Enter Programming mode