Page 36
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
We can disable the CCTV function by pressing
o "Menu" button (between 1 and 3 seconds) or
o By pressing the shortcut button or
o By selecting the icon of CCTV function on the menu.
e9) Panic Alarm
Explained in option: e6) Auxiliary function F1.
Notes:
- If you have a motion detector, this can be connected to the doorbell so that anytime
the camera detects a person it generates a ringtone and activates the video.
- We suggest deactivating the Auxiliary video with door bell function during long
absences (vacations), in order to avoid the monitor screen permanently remaining on
when a call is made from the panel.
Via the MENU.
(Pressing "Menu" for 3 seconds.
).
For Shortcut buttons.
(Short press "Menu" ).
For example, Lift Control as a shortcut
buttons (x). This function is enabled as a
shortcut button and also appears in the
menu.
x
xxxxM
x
e10) Lift Control
Upon pressing the LIFT icon (shortcut or all-purpose) a command is sent to the MDS-
VDS decoder ref. 2409, this command will be interpreted by the decoder (in future
versions). Not available on current decoders.
The decoder will send an activation sensor command to the MDS central unit.
The activation sensor generates an activation message to the Central Unit, which may
set off various actions depending on the CU configuration: activation of relays, message
to guard, etc... This function is generally used to activate relays, and often for the lift
control.
To Next Page
Loading...
Need help?
General
