Page 40
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
1. Select the default parameters option via
the cursors (white line under the icon) and
press. The monitor exits the menu and
starts to save the selected option. This status
is displayed, since it sequentially goes
through all capacitive buttons, indicating that
the reset is being performed.
2. When all capacitive buttons
have been lit, this option is
saved.
g3) Factory Configuration
This leaves the monitor with the default configuration, (and even deletes the programmed
monitor´s address)
1. Select the default parameters option via
the cursors (white line under the icon) and
press. The monitor exits the menu and
starts to save the selected option. This sta-
tus is displayed, since it sequentially goes
through all capacitive buttons, indicating
that the reset is being performed.
To Next Page
Loading...
Need help?
General
