To Next Page

To Previous Page

Page 51

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

Lock Releases / Call Guard Unit Button.

· Pressing this button whilst communicating with the Entry Panel will activate the lock

release.

Note: The icon will indicate the channel activated at each moment (upper right

corner of the monitor).

· Pressing this button whilst the monitor is on standby will result in a call being made

to the guard unit (where one exists).

Note: If the channel is busy an error tone "BEEP" will be generated and the call to

the guard will not be made.

· The option of activating an output terminal (F2), once the lock-release is activated.

This output remains active while pressing the button.

Notice:

- Function assigned by the installer. Consult the installer.

NOTE: The monitor screen goes on once the call from the panel has ended.

Buttons for Additional Functions.

Notice:

- Function assigned by the installer. Consult the installer.

- They can be activated:

o By pressing the shortcut button or

o By selecting the icon of the auto-start function on the menu.

F1-F2

Induction loop

This function is available on depending model.

Including induction loop. There are identified with a label.

· Includes an induction loop which interacts with audio devices used by

the hearing impaired.

· Note: In manual audio devices Digital Mode should be configured.

Fermax SMILE 3.5” Monitor User Manual

Questions and Answers: