To Next Page

To Previous Page

Page 34

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

SMILE MONITOR

Buttons

Audio and Hang-up Activation Button.

· Upon receiving a call,

(the user has 30" seconds to answer before returning to standby.

During this time the blue led audio button will blink to report a pending call to answer),

press this button to talk to the guest. The audio channel is opened from street to

residence, (the blue led on the audio button lights up steadily to indicate that it is

in a conversation with the street and anything said will be heard here), this

works with handsfree.

· Press to complete the communication,

(upon completion the blue led audio light

turns off again). The monitor´s default internal timer is 90 seconds.

Notes:

- The conversation is private, no other terminal can hear it.

- "Handsfree" mode is default mode.

- While the audio channel is open the input audio can be regulated. See the

corresponding chapter on: "Audio Adjustments."

- If the monitor is configured with the conversation in "simplex mode," press the

audio button to talk and release it to listen,

(upon receiving the call, the blue led

audio button will blink to report a pending call to answer), uonce we open the channel

we will have audio in the monitor direction (the blue led audio will remain lit), cuando

pulsamos el botón de audio cambiaremos el sentido de la comunicación. when

we press the audio button we will change the communication direction. The icon

will indicate the channel we have activated at each moment (upper right corner of

the monitor). The input channel volume is always adjustable during the

conversation.

Wildcard

Lock-

releases

Audio

1 1

Fermax VDS Smile Monitor User Manual

Questions and Answers: