Fermax VDS Smile Monitor User Manual

Page 36
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
SMILE VDSSMILE VDS
SMILE VDSSMILE VDS
SMILE VDS
Lock Releases / Call Guard Unit Button.
· Pressing this button whilst communicating with the Entry Panel will activate the lock
release.
Note: The icon will indicate the channel activated at each moment (upper right
corner of the monitor).
1
· Pressing this button whilst the monitor is on standby will result in a call being made
to the guard unit (where one exists).
Note: If the channel is busy an error tone "BEEP" will be generated and the call to
the guard will not be made.
· The option of activating an output terminal (F2), once the lock-release is activated.
This output remains active while pressing the button.
Note:
- Function assigned by the installer. Consult the installer.
Buttons for Additional Functions.
Note:
-
Function assigned by the installer. Consult the installer.
- They can be activated:
o By pressing the shortcut button or
o By selecting the icon of the auto-start function on the menu..
F1-F2
Door lock-release
When a call is received from the entry panel, you
can open the door at any time, by pressing the
button
.
Operation
1

Fermax VDS Smile Monitor Specifications

General

Brand	Fermax
Model	VDS Smile Monitor
Category	Intercom System
Language	English