To Next Page

To Previous Page

Page 38

SMILE VDSSMILE VDS

SMILE VDS

SMILE VDSSMILE VDS

SMILE VDS

Manual Monitor Activation (Auto-Start)

With the monitor on standby, press and hold the

wildcard

for 1 second to switch the monitor on

manually. to sequentially select between the main

camera and the secondary camera (where one exists),

press and hold the wildcard button

for 2 seconds.

To activate the audio and speak to the visitor or open

the door, follow the steps above.

If communication is not established with the entry pa-

nel, the monitor will automatically go off after 30

seconds.

Notes:

- The wirldcard button by default is for

autostart, (even though you can program it

with another function, ask your installer.

- Auto-start can be performed:

o Wildcard button

o By pressing the shortcut button or

o By selecting the icon of the auto-start

function on the menu.

Via the MENU.

(Pressing "Menu" for 3 seconds ).

With shortcut buttons.

(Short press "Menu" ).

Note: When communicating or only with video, pressing the Menu button twice displays

the shortcut buttons.

Fermax VDS Smile Monitor User Manual

Questions and Answers: