DUOX VIDEO MONITOR 3
Select with
the
icon and confi rm with
.
Each time the
is pressed the number increases ( starting
with 1) and the
arrow is used for moving the cursor
A white cursor indicates where the digit will be entered.
Confi rm with
to complete.
PROGRAMMING MENU
CONFIRM
PROGRAMMING FROM THE MONITOR
3. MONITOR SETTINGS
ENTER NUMBER
MANUAL FULL
MONITOR
With an image on the monitor, by pressing the button
,
(or upon receiving a call without
picking up), press the
key to show the video settings.
Select the settings option and increase or decrease with
and .
VIDEO SETTINGS
AUDIO SETTINGS
While the audio channel is open, press the
button and a menu screen appears for this
setting.
Increase or decrease
with
and
, until
obtaining the desired
regulation.
Notice: Maximum conversation time: 90 seconds.
1 23
MONITOR TECHNICAL CHARACTERISTICS (OSD TFT 4.3” Screen)
Power supply 18 Vdc
Standby consumption 38 mA
Maximum consumption 370 mA
Maximum consumption (with Inductive loop) 850 mA
Operating temperature [-5º , +40ºC] / [23º, 104ºF]
12 3 4
0 0 0 0 0 1
To Next Page
Loading...
Need help?
General