Using the LED lamp
NOTE!
Risk of damage!
Attempting to open the lamp by twisting can
damage the device.
- The LED lamp is maintenance-free and cannot be opened or
adjusted by twisting.
-
Press on the lamp glass on the bottom of the hand grip
to
turn the LED lamp on.
- Repeat the procedure to turn the LED lamp off again.
Cleaning
1. Allow the device to completely cool down.
2. Wipe the housing of the device with a clean, slightly damp
cloth.
3. Wipe the charger with a clean, dry cloth.
4. Dry the device thoroughly and leave it to dry completely for
some time.
Maintenance
The device and accessories are maintenance-free!
Do not lubricate the device. Dust and chips will
deposit on a film of grease and increase wear!
Operation
31
To Next Page
