The new UKCA (UK Conformity Assessed) marking
declares that the product conforms to all
applicable U.K. legislative requirements and that
appropriate conformity assessment procedures
have been successfully completed.
The “GS” (Tested Safety) certification mark confirms
the device’s compliance with the German Product
Safety Act (ProdSG for short).
This symbol identifies devices that belong to the
protection class II.
Read the operating manual.
The device is designed for interior use only.
This symbol describes the power adaptor’s
polarity: negative (-), positive (+).
DC voltage
Safety
The following signal words are used in this
operating manual.
Explanation of symbols
7
To Next Page
Loading...
