To Next PageTo Next PageWhat to do if the system water pressure sensor is faulty on my Ferroli ATLAS D ECO UNIT?
If there is a system water pressure sensor fault in your Ferroli Boiler, it could be that the wiring is disconnected. Check the wiring.
What causes a preheater fault in my Ferroli Boiler?
If there is a preheater fault in your Ferroli Boiler (the contact does not close in 120 seconds), it could be that the wiring is disconnected. Check the wiring.
Overview of the boiler, control panel layout, buttons, indicators, and basic operation.
Procedures for starting, stopping, and adjusting boiler settings like temperature and modes.
Guidelines for qualified personnel on general installation, location, ventilation, and plumbing connections.
Instructions for setting the circulating pump speed for different system configurations.
Instructions for connecting an external tank and accessing the boiler's service menu.
Guidance on connecting the burner to the oil feed line, including filter installation.
Guidance on electrical grid connection, optional thermostat, and flue system connection.
Procedures for adjusting pump pressure, combustion head, air damper, and electrode positioning.
Checks before first lighting and after maintenance operations.
Details the burner ignition sequence, unit cycle, and operational states.
Covers periodic checks, boiler cleaning, and accessing/cleaning burner components.
Identifies fault codes, causes, cures, and diagnostic indicators for the boiler.
Details on main parts, connection diagrams, pressure loss curves, and technical specifications.
Illustrates the electrical connections and components for the boiler's control system.
Presents energy efficiency and performance data for the ATLAS D ECO 30 UNIT model.
Presents energy efficiency and performance data for the ATLAS D ECO 42 UNIT model.
General