Ferroli CONNECT - Wi-Fi Configuration (Receiver-Router)

39
EN
cod. 3541S180 - Rev. 04 - 09/2019
5.5 
Connect with your Smartphone / Tablet device to the local WiFi network.
Method 1
• Click “+” and enter the local network password
• Press “next” .
• In the receiver, briey press the WPS button with a dedicated tool
• Press “next” .
• Follow the APP instructions
If the procedure was unsuccessful:
• Check the WiFi connection of the mobile device (the conguration must be done with
WiFi)
• Check the router, restart the mobile device and repeat the operations (Method 1)
If the procedure of method 1 was unsuccessful, continue with method 2.
Method 2
• Open the APP and enter login
• In the receiver, press the WPS button (for at least 7 seconds) with a dedicated tool,
until the LED button ashes red
• Select the smartphone/tablet WiFi  (ignore the no Internet con-
nection message)
• Rename the SSID network  with the local one and enter the
password
• Check that the AP option is active
• Press “next” .
• Follow the APP instructions