Ferroli CONNECT User Manual

31
EN
cod. 3541S180 - Rev. 04 - 09/2019
USB cable Power supply AAA type batteries
Table support Accessories
4.2 Installing the receiver
 To protect the device, remove the power supply from the boiler before mak-
ing the connection. The operation must be carried out by qualied personnel.
The receiver can work with the OpenTherm protocol or with the On-Off contact.

Ferroli CONNECT Specifications

General

Type	Smart Thermostat
Connectivity	Wi-Fi
Temperature Control	Programmable
Control	App and Voice Control
Display	LCD
Power Supply	Battery