What to do if my Ferroli Heat Pump displays an outdoor air temperature sensor (T4) error?
If your Ferroli Heat Pump is showing an error related to the outdoor air temperature sensor (T4): 1. Check if the T4 sensor connector is loose and reconnect it if necessary. 2. Inspect the T4 sensor connector for moisture or water; remove any water, dry the connector, and apply waterproof adhesive. 3. If the sensor is faulty, replace it with a new one.
What should I do if my Ferroli OMNIA H Heat Pump shows an error for the plate heat exchanger refrigerant inlet temperature sensor (T2)?
If your Ferroli Heat Pump is showing an error related to the plate heat exchanger refrigerant inlet (liquid pipe) temperature sensor (T2): 1. Check if the T2 sensor connector is loose and reconnect it if necessary. 2. Inspect the T2 sensor connector for moisture or water; remove any water, dry the connector, and apply waterproof adhesive. 3. If the sensor is faulty, replace it with a new one.
What should I do if my Ferroli OMNIA H Heat Pump shows an error for the plate heat exchanger refrigerant outlet temperature sensor (T2B)?
If your Ferroli Heat Pump is showing an error related to the plate heat exchanger refrigerant outlet (gas pipe) temperature sensor (T2B): 1. Check if the T2B sensor connector is loose and reconnect it if necessary. 2. Inspect the T2B sensor connector for moisture or water; remove any water, dry the connector, and apply waterproof adhesive. 3. If the sensor is faulty, replace it with a new one.
General| Model | OMNIA H Series |
|---|---|
| Category | Heat Pump |
| Type | Air-to-water |
| Refrigerant | R32 |
| Operating Mode | Heating and Cooling |
| Heating Capacity | 4 - 16 kW (depending on model) |
| Energy Efficiency Class | A+++ |
Description of the wired remote controller and its functions.
Specifications related to the indoor unit.
Specifications related to the outdoor unit.
Criteria for choosing the indoor unit installation location.
Criteria for choosing the outdoor unit installation location.
Instructions for wiring the indoor unit.
Instructions for wiring the outdoor unit.
Accessing and navigating the service menu.
Configuration options for domestic hot water production.
Parameters for configuring the cooling operation mode.
List of error codes, malfunctions, and corrective actions.
Important safety warnings for installation and operation.
To Next Page