1
2
3
4a
4b 5
2.4 Removing Your Sensor
The Sensor tail is designed so that it cannot be inserted "too
high" in the vagina. To remove:
1. First wash your hands with soap and warm water.
2. Then check carefully with your fingers to see if you can
feel the tail portion of the Sensor.
3. Remove the Sensor by gently grasping and pulling on the
tail.
If you cannot locate the tail:
4. Get into a similar comfortable position as for insertion. It
is much easier to remove if you are squatting and relaxed.
5. Then try to find the tail with one finger. Once you have
To Next Page
Loading...