1 Introduction
1-3
Festo CDPX-… en 1203NH
1.3 Standard and approvals
The products have been designed for use in an industrial
environment in compliance with the 2004/108/EC EMC
Directive.
The products have been designed in compliance with:
EN 61000-6-4 EN 55011 Class A
EN 61000-6-2 EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
The installation of these devices into the residential,
commercial and light-industrial environments is allowed only
in the case that special in measures are taken in order to
ensure conformity to EN 61000-6-3.
The products are in compliance with the Restrictions on
Certain Hazardous Substances (RoHS) Directive 2002/95/EC
In compliance with the above regulations the products are CE
marked.
To Next Page
Loading...
