Need help?Do you have a question about the Festo Controller CECC-LK and is the answer not in the manual?
General| Brand | Festo |
|---|---|
| Model | Controller CECC-LK |
| Category | Controller |
| Language | English |
Provides essential safety warnings and precautions for operating the controller.
Introduces CODESYS V3 pbF, its packages, remanent variables, and memory.
Describes options for mounting the CECC on an H-rail or wall.
Identifies and describes the various connectors, ports, and status LEDs.
Details the connection of the 24 V power supply to the CECC controller.
Describes the digital I/O interface, including inputs, outputs, and connections.
Details the CANopen interface, pin allocation, and connection guidelines.
Describes the USB interface for connecting external storage media.
Details the Ethernet interface, pin allocation, and supported protocols.
Explains the IO-Link connections supported by CECC-LK and CECC-S variants.
Guides on how to create a new project in the CODESYS programming environment.
Explains how to select the correct CECC device within the CODESYS project.
Details the process of adding devices to the CODESYS project via network scanning.
Guides on configuring the digital inputs and outputs of the CECC controller.
Covers the setup and configuration of CANopen slaves connected to the CECC.
Steps to configure the CECC controller as a Modbus TCP slave device.
Process of logging into the CECC controller for online operations and transfer.
How to start and monitor the application running on the CECC controller.
To Next Page