Need help?Do you have a question about the Festo CPX-AP Series and is the answer not in the manual?
General| Power supply | 24 V DC |
|---|---|
| Protocol | Ethernet/IP |
| I/O modules | Digital input, Digital output, Analog input, Analog output |
| Temperature range | 0 °C ... +50 °C |
| Configuration | Modular |
| Ambient temperature | 0 °C ... +50 °C |
| Storage temperature | -25 °C ... +70 °C |
| Relative humidity | 0 - 95% (non-condensing) |
Provides essential safety instructions for using the product correctly and safely.
Explains internal system communication using connecting cables and address assignment.
Illustrates the system communication and addressing logic with a diagram.
Explains the power supply concept for the CPX-AP system, including logic and load supply.
Details the two separate voltages (PS and PL) for internal electronics, sensors, outputs, and valves.
Explains power supply distribution to modules and the concept of voltage zones.
Provides steps and tables for calculating voltage drop based on current consumption and cable resistance.
Lists checks for module mounting, functional earth connection, and line seating during commissioning.
Describes configuring interface settings using control elements on the interface itself.
Lists options for error diagnostics: LED displays, internal diagnostics, and host system diagnostics.
Defines severity levels for diagnostic messages: Error, Warning, Maintenance, and Information.
Lists specific diagnostic messages with their hex/decimal IDs, descriptions, and remedies.
Provides additional diagnostic messages related to startup parameters, limits, and parameter sets.
Details diagnostic messages for device address issues, wire breaks, communication interruptions, and initialisation failures.
Lists diagnostic messages for APDD invalid, start-up APDD invalid, and initialisation failures.
To Next Page