Festo FED-40 - Page 86

2 Technical Specifications
Festo FED-… en 1107g 2-2
Notes:
1) Feature depends on the panel models; see Table below
4) FED-40, FED-50, FED-60, FED-300, FED-301, FED-400
Electromagnetic Compatibility (EMC)
Emitted interference Classe A EN 55011
Immunity to radiated radio frequency
for electromagnetic fields
80 MHz - 1 GHz, 10 V/m
900 MHz, 10V/m
EN 61000-4-3
ENV 50204
Immunity to disturbances inducted by
radio frequency fields
0.15 - 80 MHz, 10 V EN 61000-4-6
Immunity to interference, burst 2 KV power supply
1 KV signal lines
EN 61000-4-4
Electrostatic discharge 8 KV in air EN 61000-4-2
Interfaces RS-232 connector 15-pin sub-D coupling, 9-pin for FED-770
and FED-3000
−
PC/printer port
(1)
300 - 38400 Baud
−
PLC port RS-232, RS-422, RS-485, CL 20 mA (active) with the
exception of the models indicated in note
(4)
,
15-pin sub-D connector, 9-pin for FED-770 and FED-3000
300 - 38400 baud
−
Ethernet Port
(1)
RJ45 10/100 Mbit/s
−
USB Port
(1)
Host Interface Version 1.1
−
AUX port 9-pin sub-D coupling (functionality can be configured with
an optional communication module)
Others:
−
User memory
(1)
−
Recipe memory
(1)
16KB / 32KB RAM with back-up battery
−
Hardware clock
(1)
Clock and calendar with back-up battery
−
Alarms
(1)
256/1024
−
Historical event list
(1)
Last 256/1024 events with back-up battery
−
Programming software Designer FED 6.06 or higher