Festo SBSI-EN - User Manual

Essential safety precautions before operating the Vision Sensor.

Specifies the necessary hardware and software prerequisites for configuration.

Describes the sensor's primary industrial applications and detection capabilities.

Provides a comparative overview of features for Object and Code Reader sensor types.

Details available Vision Sensor models, including optics, focus, and field of view.

Illustrates the field of view characteristics for different lens focal lengths.

Guidelines for securing the Vision Sensor and its mounting.

Instructions for safely connecting the Vision Sensor's electrical components.

Essential network configuration steps for connecting the Vision Sensor to a PC.

Step-by-step guide to configuring the PC's IP address for direct connection.

Instructions for setting the Vision Sensor's IP address within a network.

Provides a brief guide to starting and using the software.

Explains how to manage sensors, simulations, and password settings.

Guides on creating, configuring, and managing inspection tasks (jobs).

Explains how to create and manage inspection tasks (jobs).

Explains how to configure alignment parameters for object position compensation.

Guides on the process of creating, modifying, and managing inspection jobs.

Describes how to select, create, and adjust various types of detectors for inspection.

Describes how to load and save inspection jobs and job sets.

Covers configuration of digital inputs/outputs and data output interfaces.

Details settings for resolution, zoom, trigger mode, shutter speed, and gain.

Covers activation of image transmission and use of the image recorder.

Details how to transfer settings and start the sensor for operation.

Explains how to configure data archiving settings via FTP or SMB.

Describes pre-processing filters like Gauss, Erosion, and Dilation for image enhancement.

Covers settings for controlling job cycle time, processing time, and LED power.

Guides on using the Visualisation Studio for monitoring images and analyzing results.

Details the execution of jobs on PC and display of results statistics.

Lists all Vision Sensors detected and available on the network.

Covers methods to locate and add sensors to the Device Manager list.

Details how to configure a sensor using the Configuration Studio.

Describes viewing images and results via the Visualisation Studio.

Explains how to modify network parameters like IP address and subnet mask.

Instructions for updating the Vision Sensor's firmware.

Covers managing user accounts and password levels for access control.

Details using contour detection for alignment with edges at any angle.

Guides on creating, configuring, and managing different types of detectors.

Lists available detectors for Object and Code Reader types with their descriptions.

Explains the pattern matching detector for shape detection.

Describes the contour detector for sample edge detection at any angle.

Essential safety precautions before operating the Vision Sensor.

Specifies the necessary hardware and software prerequisites for configuration.

Describes the sensor's primary industrial applications and detection capabilities.

Provides a comparative overview of features for Object and Code Reader sensor types.

Details available Vision Sensor models, including optics, focus, and field of view.

Illustrates the field of view characteristics for different lens focal lengths.

Guidelines for securing the Vision Sensor and its mounting.

Instructions for safely connecting the Vision Sensor's electrical components.

Essential network configuration steps for connecting the Vision Sensor to a PC.

Step-by-step guide to configuring the PC's IP address for direct connection.

Instructions for setting the Vision Sensor's IP address within a network.

Provides a brief guide to starting and using the software.

Explains how to manage sensors, simulations, and password settings.

Guides on creating, configuring, and managing inspection tasks (jobs).

Explains how to create and manage inspection tasks (jobs).

Explains how to configure alignment parameters for object position compensation.

Guides on the process of creating, modifying, and managing inspection jobs.

Describes how to select, create, and adjust various types of detectors for inspection.

Describes how to load and save inspection jobs and job sets.

Covers configuration of digital inputs/outputs and data output interfaces.

Details settings for resolution, zoom, trigger mode, shutter speed, and gain.

Covers activation of image transmission and use of the image recorder.

Details how to transfer settings and start the sensor for operation.

Explains how to configure data archiving settings via FTP or SMB.

Describes pre-processing filters like Gauss, Erosion, and Dilation for image enhancement.

Covers settings for controlling job cycle time, processing time, and LED power.

Guides on using the Visualisation Studio for monitoring images and analyzing results.

Details the execution of jobs on PC and display of results statistics.

Lists all Vision Sensors detected and available on the network.

Covers methods to locate and add sensors to the Device Manager list.

Details how to configure a sensor using the Configuration Studio.

Describes viewing images and results via the Visualisation Studio.

Explains how to modify network parameters like IP address and subnet mask.

Instructions for updating the Vision Sensor's firmware.

Covers managing user accounts and password levels for access control.

Details using contour detection for alignment with edges at any angle.

Guides on creating, configuring, and managing different types of detectors.

Lists available detectors for Object and Code Reader types with their descriptions.

Explains the pattern matching detector for shape detection.

Describes the contour detector for sample edge detection at any angle.