Need help?Do you have a question about the Festo SDE5-D10-FP-Q6-P-M8 and is the answer not in the manual?
General| Output type | PNP |
|---|---|
| Type of pressure | Relative pressure |
| Measuring range | 0 ... 10 bar |
| Operating voltage range DC | 15-30 V |
| Electrical connection | M8x1 |
| Switching output | PNP |
| Operating medium | Compressed air |
| Media temperature | 0 ... 50 °C |
| Ambient temperature | 0 ... 50 °C |
| Materials in contact with medium | NBR |
| Housing material | PBT |
Step-by-step guide for mechanically fitting the sensor, including wall support installation.
Instructions for connecting the pneumatic ports using specified tubing types and connectors.
Details on electrical wiring, pin assignments, cable colors, and safety precautions for connections.
Describes the procedure for setting the switching pressure on O/C function variants using the EDIT button.
Details how to set teach pressures (TP1, TP2) for specific switching function modes.
Instructions for selecting operating modes (1-3) on the SDE5-...-FP-... model via the EDIT button.
To Next Page
