To Next Page
V
Valerie MorrisonAug 25, 2025
What to do if workpiece joints are misaligned horizontally with Festool Domino DF 500 Power Tool?
- BBrandon MorganAug 25, 2025
If your workpiece joints are misaligned horizontally when using the Festool Power Tool, consider the following: * Ensure the workpiece is securely clamped before plunging. * Check the stop latches. * Check the calibration of the Horizontal Position Gauge (sight gauge). * Avoid plunging the mortising bit too fast. * Make sure the friction pads on the front of the joiner are not worn, damaged, or missing.
General
