24
the warranty. Furthermore, damage caused
by the use of non-original accessories and
consumable materials (e.g. sanding pads)
is also excluded. Complaints can only be
recognised if the tool is returned while still
assembled to the supplier or an authorised
Festool Customer Service workshop. Keep
the Operating Instructions, Safety Instruc-
tions, Spare Parts List and purchase receipt
in a safe place. Otherwise the respective,
current warranty conditions of the manu-
facturer shall apply.
Note
Due to continuous research and develop-
ment work, we reserve the right to make
changes to the technical content of this
documentation.
13 EU Declaration of Conformity
Circular cross-cut saw Serial no.
KS 120 EB 495773, 495774, 495775,
495776, 495777
KS 88 E 496868, 496869, 496871,
496872
Year of CE mark KS 120 EB 2007
KS 88 E 2009
We solely declare that this product conforms
with the following standards and normative
documents: EN 61029-1, EN 61029-2-9, EN
55014-1, EN 55014-2, EN 61000-3-2, EN
61000-3-3 in accordance with the regula-
tions in Directives 2004/108/EC, 98/37/EC
(until 28 Dec. 2009), 2006/42/EC (from 29
Dec. 2009).
Dr. Johannes Steimel
Head of research and development
Festool GmbH, Wendlingen
To Next Page
Loading...
