16
Accessories
Use only original Festool sanding pads. Low-quality
sanding and polishing pads may cause serious ma-
chine imbalances that decrease the quality of the
work results and increase wear on the power tool.
Festool provides comprehensive accessories which
allow you to use your power tool effectively and for
diverse applications, e.g.
• Additional hand grip ZG-LHS 225
• Harness TG-LHS 225
• Mobile dust extractor CTL/M 36 E AC
PLANEX
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festoolusa.com".
Systainer
Many Festool products are shipped in a unique sys-
tem container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be inter-
locked together. They also can be interlocked atop
Festool CT dust extractors.
To open the Systainer
To lock the Systainer
To connect two Systainers
Place one Systainer on the top of the other (Fig.
[9
A]
).
The Systainers are connected and locked.
A new generation Systainer is connectable on
top of a previous generation Systainer by the
four latches of the previous Systainer.
Environment
Do not throw the power tool in your household
waste!
Dispose of machines, accessories and
packaging at an environmentally responsible recy-
cling centre. Observe the valid national regulations.
Turn the T-loc
[9-1]
to this position.
Turn the T-loc
[9-1]
to this position.
Turn the T-loc
[9-1]
to one of this posi-
tions (Fig.
[9 B]
).
open
lock
connect
connect
T-loc
9-1
A
9
B
To Next Page
Loading...
