measuring tools I use every
day.
The Festool VS-600 jointing
system and their routers are all
designed around the metric
system. While you can
convert back and forth, you
don’t need to and doing so just
introduces error and
frustration. In this manual I
am using the metric units of
measure as those are the
markings on the Festool VS-
600 and routers. It is not
important that you can
visualize the length of say,
300mm, only that you know it
is twice 150mm or ten times as
much as 30mm. It is all
relative.
37
To Next Page
Loading...
