3. Press the
button to increase the sound from the left
speakers or the button to increase the sound from
the right speakers.
By pressing the
or buttons briefly, the levels will
change progressively. By pressing them down longer, the
levels will change quickly.
Select the value “0” to set the right and left audio outputs
at the same level.
Fader Adjustment
Proceed as follows:
1. Press AUDIO button.
2. Press the
or button to set “Fader” in the AUDIO
menu.
3. Press the
button to increase the sound coming from
the rear speakers or the
button to increase the
sound coming from the front speakers.
By pressing the
or buttons briefly, the levels will
change progressively. By pressing them down longer, the
levels will change quickly.
Select the value “0” to set the right and left audio outputs
at the same level.
Loudness Function — If Equipped
The Loudness function improves the volume of the
sound while listening at low volumes, increasing the bass
and treble.
To activate/deactivate this function, select the “Loud-
ness” setting in the AUDIO menu. The condition of the
function (on or off) is shown on the display for a few
seconds by the wording “Loudness On” or “Loudness
Off”.
180 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
