The EVSE is used to charge the high voltage battery and
plugs into any standard AC grounded outlet. To access
the charge cord, lift the rear cargo cover and remove the
charging cord from the storage bin.
NOTE: The EVSE charge cord is used for Level 1
charging only.
SAE J1772 Charge Receptacle
Your vehicle uses an industry standard SAE J1772 charge
receptacle (vehicle’s inlet) for both AC Level 1 (120V) and
AC Level 2 (240V) charging.
NOTE: The charge receptacle door locks and unlocks
with the vehicle doors.
EVSE Location
SAE J1772 Charge Receptacle
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
To Next Page
Loading...
