Fiat Connect Nav+ - Page 77

CONNECT Nav+
76
“Add” icon key
“Add” icon enables to add a new en-
try to the directory.
Rotate the encoder 14-fig. 1, select
“Add” icon and press “ENTER” to
confirm 15-fig. 1; the display shows
the status in fig. 62, and the follow-
ing icon keys: “Name”, “Number”,
“Location”, “Voice recognizer”, “OK”.
“Name”: allows input of name and
surname of new entry, proceed as fol-
lows:
IMPORTANT When selecting
“Name”, remember that it is not pos-
sible to add a name already present in
the Navigator (NAV) function direc-
tory.
– rotate the encoder 14-fig. 1,
choose “Select” icon and press “EN-
TER” to confirm 15-fig. 1; the display
shows the keypad and the editing box
fig. 63.
– form name and surname by select-
ing letters one by one through the en-
coder 14-fig. 1 and then press “EN-
TER” to confirm 15-fig. 1; proceed in
this way until completing the entry;
– rotate the encoder 14-fig. 1, se-
lect the “OK” icon and then press
“ENTER” to confirm 15-fig. 1; the dis-
play returns to screen in fig. 62.
“Number”: allows insertion of new
phone number, proceed as follows:
– rotate the encoder 14-fig. 1, se-
lect the “Number” icon and then press
“ENTER” to confirm 15-fig. 1; the dis-
play shows the keypad and the edit-
ing box fig. 63.
– form the number selecting digits
one by one through the encoder 14-
fig. 1 and then press “ENTER” to con-
firm 15-fig. 1; proceed in this way un-
til completing the required phone
number;
– rotate the encoder 14-fig. 1, and
then press “ENTER” to confirm 15-
fig. 1; the display returns to the
screen in fig. 62.
fig. 62
F0C4056g
fig. 63
F0C4194g