Fiat DOBLO 2016 - Speed Warning (Speed Limit)

Selecting an option from the main
menu without a submenu:
– briefly press the MENU
button to
select the main menu option to be
set;
– press the
or buttons (with single
presses) to select the new setting;
– briefly press the MENU
button to
store the new setting and to go back
to the same main menu option selected
previously.
Selecting an option from the main
menu with a submenu:
– briefly press the MENU
button to
display the first submenu option;
– press buttons
or (with single
presses) to scroll through all the
submenu options;
– briefly press the MENU
button to
select the displayed submenu option
and to open the relevant setup menu;
– press buttons
or (with single
presses) to select the new setting
for this submenu option;
– briefly press the MENU
button to
store the new setting and to go back
to the same submenu option selected
previously.
Adjusting the vehicle
interior lighting
This function is available, with the
dipped headlamps on and at night, to
adjust the brightness of the instrument
panel, buttons, sound system display
and automatic climate control display.
During the daytime, and with the
dipped headlamps on, the instrument
panel, buttons and sound system
and automatic climate control displays
are set to maximum brightness.
Proceed as follows to adjust the
brightness:
– press the MENU
button briefly to
make the display flash the previously
stored level;
– press button
and to set the
required brightness level;
– press the MENU
button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
Speed warning (Speed
limit)
This function enables setting of the
vehicle speed limit (km/h or mph).
When this limit is exceeded the driver is
immediately alerted (see section
“Warning lights and messages”).
To set the desired speed limit, proceed
as follows:
– briefly press the MENU
button:
the display will show the words (Speed
Beep);
– press the
or button to select
speed limit activation (On) or
deactivation (Off);
– if the function is on, press the
or
buttons to select the required speed
limit and then press MENU
to
confirm;
NOTE The speed may be set anywhere
between 30 and 200 km/h or 20 and
125 mph, depending on the previously
chosen unit (see “Setting the unit of
measurement (Unit)”). The setting will
increase/decrease by 5 units each time
button
/ is pressed. Hold down
the
/ button to automatically
increase/decrease the setting rapidly.
Complete the adjustment with single
presses of the button when you
approach the desired value.
– press the MENU
button briefly to
return to the menu screen or hold the
button down to return to the standard
screen without storing.
To cancel the setting, proceed as
follows:
– briefly press button MENU
, (On)
will flash on the display;
– press button
, (Off) will flash on the
display;
75