Fiat Doblo - REPLACING FUSES

DIRECTION
INDICATORS
Front
To replace the bulb, proceed as
follows:
❒ remove the protective cover C fig.
152;
❒ turn bulb holder A fig. 155
anticlockwise and remove it;
❒ extract the bulb, pushing it gently
and turning it anticlockwise;
❒ replace the bulb and refit the bulb
holder A fig. 155 by turning it
clockwise and locking it properly into
place;
❒ refit the protective cover C fig. 152.
Side
IMPORTANT Go to a Fiat Dealership
to have bulbs for the side direction
indicators replaced, because they
are located inside the wing mirror.
MAIN BEAM
HEADLIGHTS
To replace the bulb, proceed as
follows:
❒ remove the protective cover A fig.
152;
❒ disconnect the electrical connector;
❒ release the bulb holder from the
side clips A fig. 156;
❒ extract the bulb and replace it;
❒ fit the new bulb, ensuring that the
outline of the metal part coincides
with the grooves on the curve of the
headlight, pressing to engage it
with the side clips A fig. 156; then
reconnect the electrical connector;
❒ refit the protective cover A fig. 152.
FOG LIGHTS
(for versions/markets, where
provided)
IMPORTANT Go to a Fiat Dealership
to have the front fog light bulbs
replaced.
REAR LIGHT
CLUSTERS
The rear light clusters contain the
bulbs for the side lights, direction
indicators and reversing/rear fog
and brake lights. To access the light
clusters, proceed as follows:
❒ open the rear doors;
❒ undo the fixing screws A fig. 157;
❒ disconnect the electrical connector
and then remove the light cluster.
The bulbs are arranged inside the
light cluster fig. 158 as follows:
155
F0V0523
156
F0V0524
164
IN AN EMERGENCY