FLUIDS AND LUBRICANTS
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the
requirements of the Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel
consumption and emission specifications. Lubricant quality is crucial for engine operation and duration.
RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Use
Fluid and lubricant features for a correct use
of the vehicle
Original fluids and
lubricants
Replacement interval
Lubricants for
petrol engines
SAE 5W-40, ACEA C3 grade totally synthetic
lubricants.
Classification FIAT 9.55535-S2.
SELENIA K P.E.
Contractual Technical
Reference No. F603.C07
According to the
Scheduled Servicing
Plan
Diesel engine
lubricants
41)
SAE 5W-30 ACEA C2 grade totally synthetic
lubricants.
Certification FIAT 9.55535-S1.
SELENIA WR P.E.
Contractual Technical
Reference No. F510.D07
According to the
Scheduled Servicing
Plan
In the case of emergency, if the above specified lubricants are not available, products with the minimum indicated
ACEA performance can be used for topping up; in this case optimal performance of the engine is not guaranteed.
IMPORTANT
41) The use of products with specifications other than those indicated above could cause damage to the engine not
covered by the warranty.
277
To Next Page
Loading...
