Fiat Doblo - Page 30

Repositioning the seat
To return the seat back to its
normal position, proceed as follows:
❒ grip tab A fig. 30 and lift the backrest
upwards;
❒ operate levers B fig. 31 and lift the
seat further upwards.
18) 19)
ACCESS TO THE REAR
SEATS
(Doblò and Doblò Combi versions)
To access the rear seats, open
one of the sliding side doors (see
"Doors" in this section).
FOLDING TABLE SEAT
(Doblò and Doblò Combi versions,
where provided)
On some versions the seat can be
folded into a table position.
20)
Completely retract the seat in table
position for a total folding down
avoiding interference with the
dashboard.
IMPORTANT Move the seat only
when there are no rear passengers.
Seat folding
❒ Open the passenger side door;
❒ Pull lever A fig. 32 and fold the
backrest forwards in the direction
indicated by the arrow;
❒ Push the backrest B fig. 32 down:
the seat is now completely folded
over on itself into the "table" position.
Repositioning the seat:
❒ operate lever A fig. 32 and lift the
backrest upwards.
3RD ROW SEAT
MOVEMENTS
Proceed as follows:
❒ completely lower the rear seat head
restraints;
29
F0V0144
30
F0V0145
31
F0V0146
32
F0V0201
26
KNOW YOUR VEHICLE