❒ fold the cushion and the backrest
over;
❒ reposition the head restraint;
❒ re-position the rolling curtain in its
housing.
IMPORTANT Make sure that the
seat is properly secured to the
fastenings on the floor and that the
lever A fig. 33 is tightened (red band
not visible).
FRONT BENCH
(for versions/markets, where
provided)
15)
Some versions feature a front bench
with central and side passenger
backrests that fold down to a table.
To fold down the backrests, pull
tabs A or B fig. 37 to fold down the
central or side section of the
backrest respectively fig. 38.
The central backrest features a
retaining clip that can be used to
hold documents.
IMPORTANT Before folding down
the central backrest, you need
to completely lower the head
restraint to prevent it from interfering
with the gear lever in certain driving
conditions.
By pulling tab C fig. 37, you can also
raise the single central and side
seat cushion to access a dedicated
storage compartment fig. 39.
37
F0V0550
38
F0V0551
39
F0V0552
28
KNOW YOUR VEHICLE
To Next Page
Loading...
