SPLIT ROTATING
PARTITION
(for versions/markets, where
provided)
Should it be necessary to transport
long, bulky loads, the passenger
side panel can be removed and
fixed to the driver’s side, as follows
fig. 42:
❒ lay the foldaway passenger seat flat
(see previous pages);
❒ from inside the load compartment,
rotate the locking hook, remove the
panel, releasing it from the 4
passenger side pins, and fit the panel
on the driver’s side pins B, then
rotate locking hook A.
To put the partition back in its
normal position, follow the same
procedure in reverse.
DRIVER’S SIDE
TUBULAR PARTITION
(for versions with 3-seater bench)
On versions with 3-seater bench
there is a fixed ladder fig. 43 that
protects the driver if the load
transported is unstable.
COMPLETE GRILLE
PARTITION
(for versions/markets, where
provided)
On versions with 3-seater bench, a
complete partition may be
requested fig. 44 to protect all
occupants of the vehicle.
41
F0V0103
42
F0V0219
43
F0V0577
44
F0V0578
30
KNOW YOUR VEHICLE
To Next Page
Loading...
