EasyManua.ls Logo

Fiat Doblo - Page 83

Fiat Doblo
323 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting a speed limit
(SPEEd)
This function is used to set a speed
limit (km/h or mph); the driver is
alerted when this limit is exceeded
(see “Warning lights and
messages”).
To set the desired speed limit,
proceed as follows:
- press the MENU
button
briefly: the display will show the
wording (SPEED) and the unit (km/h)
or (mph) previously set;
- press
or to select speed limit
activation (On) or deactivation (Off);
- if the function is on, press
or
to select the required speed limit
and then press MENU
to
confirm;
NOTE The speed may be set in the
range from 30 to 200 km/h, or
from 20 to 125 mph according to
the previously chosen unit (see
“Setting the distance unit”)
described below. The setting will
increase/decrease by five units each
time the
/ button is pressed.
Hold down the
/ button to
automatically increase/decrease the
setting rapidly. Complete the
adjustment with single presses of
the button when you approach the
desired value.
- press the MENU
button briefly
to return to the menu screen or
hold the button down to return to
the standard screen without storing.
To cancel the setting, proceed as
follows:
- briefly the press MENU
button; (On) will flash on the
display;
- press the
button; (Off) will flash
on the display;
- press the MENU
button briefly
to return to the menu screen or
hold the button down to return to
the standard screen without storing.
Setting the clock
(Hour)
With this function, it is possible to
set the time.
To adjust, proceed as follows:
- briefly press the MENU
button; the “hours” will flash on
the display;
- press the
or button to adjust;
- briefly press the MENU ESC
button; the “minutes” will flash
on the display;
- press the
or button to adjust;
- press the MENU
button
briefly to return to the menu screen
or hold the button down to return
to the standard screen without
storing.
Setting the distance
unit (Unit)
With this function it is possible to set
the unit.
To adjust, proceed as follows:
- press the MENU
button
briefly: the display will show the
wording (Unit) and the previously set
unit (km) or (mi);
79

Table of Contents

Other manuals for Fiat Doblo

Related product manuals