Fiat Doblo - Page 88

– press the MENU button
briefly to return to the menu screen
or hold the button down to return
to the standard screen without
storing.
Set Time (Setting the
clock)
This function enables the clock to
be set through two submenus:
"Time" and "Format".
To carry out the adjustment,
proceed as follows:
– briefly press MENU
; the
display will show the two sub-
menus “Time” and “Mode”;
– press the
or button to switch
between the two submenus;
– select the required option and
then press MENU
briefly;
– if selecting the “Time” submenu,
briefly press MENU
, the
“hours” will flash on the display;
– press the
or button to make
the adjustment;
– briefly press the MENU
button; the “minutes” will flash
on the display;
– press the
or button for
setting.
NOTE The setting will increase or
decrease by one unit each time the
or button is pressed. Hold
down the button to increase/
decrease the setting rapidly and
automatically. Complete the
adjustment with single presses of
the button when you approach the
desired value.
– when you select “Mode”, pressing
the MENU
button makes the
mode flash on the display;
– press the
or button to select
"24h" or "12h".
When you have made the required
settings, press the MENU
button briefly to go back to the
submenu screen or hold the button
down to go back to the main menu
screen without saving.
– hold the MENU
button down
again to return to the standard
screen or to the main menu
according to where you are in the
menu.
Set Date (Setting the
date)
Using this function you can update
the date (day - month - year).
Proceed as follows to update:
– briefly press the MENU
button: “year” will flash on the
display;
– press the
or button to make
the adjustment;
– briefly press the MENU
button: "month" will flash on the
display;
– press the
or button to make
the adjustment;
– briefly press the MENU
button: “day” will flash on the
display;
– press the
or button for
setting.
NOTE The setting will increase or
decrease by one unit each time the
or button is pressed. Hold
down the button to increase/
decrease the setting rapidly and
automatically. Complete the
adjustment with single presses of
the button when you approach the
desired value.
84
KNOWING THE INSTRUMENT PANEL