Fiat Doblo - Page 90

when you select the “Consumption”
submenu: briefly pressing the
MENU
button makes “km/l”,
“l/100km” or “mpg” appear on
the display, depending on the
previous setting;
If the set distance unit of
measurement is "km", the fuel
consumption unit will be displayed in
km/l or l/100 km.
If the set distance unit of
measurement is "mi" the fuel
consumption unit will be displayed in
"mpg".
– press the
or button to select;
– if selecting the "Temperature"
submenu: briefly press the MENU
button and the display will show
"°C" or "°F" depending on the
previous setting;
– press the
or button to select;
When you have made the required
settings, press the MENU
button briefly to go back to the
submenu screen or hold the button
down to go back to the main menu
screen without saving.
– hold the MENU
button down
again to return to the standard
screen or to the main menu
according to where you are in the
menu.
Language (Language
selection)
Display messages can be shown in
different languages: Italian, English,
German, Portuguese, Spanish,
French, Dutch, Polish and Turkish.
To set the desired language,
proceed as follows:
– briefly press the MENU
button; the previously set
language will flash on the display;
– press the
or button to select;
– press the MENU
button
briefly to return to the menu screen
or hold the button down to return
to the standard screen without
storing.
Warnings volume
(Adjusting the
failure/warning
acoustic signal
volume)
With this function the volume of the
acoustic signal which accompanies
the display of failure/warning can
be adjusted according to 8 levels.
To set the desired volume, proceed
as follows:
– briefly press the MENU
button; the previously set
volume level will flash on the display;
– press the
or button to make
the adjustment;
– press the MENU button
briefly to return to the menu screen
or hold the button down to return
to the standard screen without
storing.
Button volume
(Adjusting the button
volume)
This function may be used to adjust
(to 8 levels) the volume of the noise
made when the MENU
, or
buttons are pressed.
86
KNOWING THE INSTRUMENT PANEL