EasyManua.ls Logo

FIBARO BUTTON - 7: Specifications

FIBARO BUTTON
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 13
ADVANCED PARAMETERS SPECIFICATIONS
23. Key Pressed 2 times – value of SWITCH ON command sent to
3rd association group
This parameter denes value of SWITCH ON command sent to devices
in 3rd association group after a double click.
Available settings: 1-255 - sent value
Default setting: 99 Parameter size: 2 [bytes]
24. Key Pressed 3 times – command sent to 3rd association group
This parameter denes commands sent to devices associated in 3rd
association group after a triple click.
Available settings: 0 - no action
1 - SWITCH ON
2 - SWITCH OFF
3 - SWITCH ON/OFF – alternately
Default setting: 0 Parameter size: 1 [byte]
25. Key Pressed 3 times – value of SWITCH ON command sent to
3rd association group
This parameter denes value of SWITCH ON command sent to devices
in 3rd association group after a triple click.
Available settings: 1-255 - sent value
Default setting: 255 Parameter size: 2 [bytes]
29. Key Held Down – command sent to 3rd association group
This parameter denes commands sent to devices associated in 3rd
association group after holding the button down.
Available settings: 0 - no action
1 - START LEVEL CHANGE UP (brightening)
2 - START LEVEL CHANGE DOWN (dimming)
3 - START LEVEL CHANGE UP/DOWN (brighten-
ing/dimming) – alternately
Default setting: 3 Parameter size: 1 [byte]
30. Alarm frame triggers
Parameter determines which actions result in sending alarm frames
to 4th association group.
Available settings: 1 - Key Pressed 1 time
2 - Key Pressed 2 times
4 - Key Pressed 3 times
8 - Key Pressed 4 times
16 - Key Pressed 5 times
32 - Key Held Down
64 - Key Released
Default setting: 127 (all) Parameter size: 1 [byte]
NOTE
Values of parame-
ter 30 may be com-
bined, e.g. 1+2=3
means that alarm
frames will be sent
after pressing the but-
ton once or twice.
i
Battery type:
Battery life:
Operating temperature:
EU standards compliance:
Radio protocol:
Radio frequency:
Range:
Dimensions
(diameter x height):
ER14250 ½AA 3.6V
est. 2 years (with default settings and
max. 10 pushes per day)
0 - 40°C (32 - 104°F)
RoHS 2011/65/EU
R&TTE 1999/5/EC
Z-Wave (500 series chip)
868.4 or 869.8 MHz EU;
908.4, 908.42 or 916.0 MHz US;
921.4 or 919.8 MHz ANZ;
869.0 MHz RU;
up to 50m (164 ft) outdoors
up to 40m (131 ft) indoors
(Depending on terrain and building
structure)
46 x 34 mm
(1.81" x 1.34")
#7: Specications
CAUTION
Using batteries other
than specied may
result in explosion.
Dispose of properly,
observing environ-
mental protection
rules.
!
NOTE
Radio frequency of
individual device
must be same as your
Z-Wave controller.
Check information
on the box or consult
your dealer if you are
not sure.
i

Related product manuals