10
LOCAL PROTECTION
After enabling the local control protection changing temperature di-
rectly on the device (by turning it) will not be possible.
Enabling local protection is recommended if you want to prevent ac-
cidental temperature change, e.g. by children. Local protection can
be enabled/disabled manualy or via app.
When attempting to change temperature if local protection is enabled:
• The device will not set new temperature,
• The LED ring will blink red 3 times.
To change the temperature use the app or disable the local protection.
#8: Local protection
To enable/disable local protection:
1. Use the included key to press and hold the button.
2. Release the button when you see red LED colour.
3. Quickly click the button to conrm.
To Next Page
Loading...
