FIBARO FGBWHWPF-102 User Manual

9
CONFIGURABLE PARAMETERS
#6: Congurable parameters
1. Color of LED ring
This parameter allows to choose color of LED ring when device is ON.
Available settings: 0 – color dependent on measured active power*
1 – color dependent on active power measure-
ments with smooth transition between colors*
2 – white, 3 – red, 4 – green, 5 – blue, 6 – yellow,
7 – cyan, 8 – magenta
9 - LED ring disabled
Default setting: 1 (color dependent on measured active power
with smooth transition between colors)
2. Measured power for blue LED ring color
This parameter allows to set power value for blue backlight of LED ring.
Available settings: 1-2500W – power consumption in Watts
Default setting: 100W
3. Measured power for green LED ring color
This parameter allows to set power value for green backlight of LED ring.
Available settings: 1-2500W – power consumption in Watts
Default setting: 200W
4. Measured power for yellow LED ring color
This parameter allows to set power value for yellow backlight of LED ring.
Available settings: 1-2500W – power consumption in Watts
Default setting: 400W
5. Measured power for orange LED ring color
This parameter allows to set power value for orange backlight of LED ring.
Available settings: 1-2500W – power consumption in Watts
Default setting: 1000W
6. Measured power for red LED ring color
This parameter allows to set power value for red backlight of LED ring.
Available settings: 1-2500W – power consumption in Watts
Default setting: 1800W
7. Measured power for violet LED ring color
This parameter allows to set power value for violet backlight of LED ring.
Available settings: 1-2500W – power consumption in Watts
Default setting: 2300W
NOTE
* Colors depending on
the measured value:
0W - white
100W - blue
200W - green
400W - yellow
1000W - orange
1800W - red
2300W - violet
i
NOTE
The value of parameter
2 must be lower than
value of parameter 3.
i
NOTE
The value of parame-
ter 3 must be between
values of parameters 2
and 4.
i
NOTE
The value of parame-
ter 4 must be between
values of parameters 3
and 5.
i
NOTE
The value of parame-
ter 5 must be between
values of parameters 4
and 6.
i
NOTE
The value of parame-
ter 6 must be between
values of parameters 5
and 7.
i
NOTE
The value of parameter
7 must be higher than
value of parameter 6.
i

FIBARO FGBWHWPF-102 Specifications

General

Brand	FIBARO
Model	FGBWHWPF-102
Category	Home Automation
Language	English