FIBARO FGFS-101 - Low temperature alarm threshold; High temperature alarm threshold

16
ADVANCED PARAMETERS
ler, according to the parameter 10 settings.
Available settings: 1-1000 (each 0.01°C)
Default setting: 50 (0.5°C) Parameter size: 2 [bytes]
50. Low temperature alarm threshold
The parameter stores a temperature value, below which visual indi-
cator blinks with a colour determined by a parameter 61 settings. By
default the visual indicator blinks blue.
Available settings: - 10000 to +10000 (each 0.01°C)
Default setting: 1500 (15°C) Parameter size: 2 [bytes]
51. High temperature alarm threshold
The parameter stores a temperature value, above which visual indica-
tor blinks with a colour determined by the parameter 62 settings. By
default the visual indicator blinks red.
Available settings: - 10000 to +10000 (each 0.01°C)
Default setting: 3500 (35°C) Parameter size: 2 [bytes]
61. Low temperature alarm indicator colour
Parameter stores RGB colour value (see the note below for details).
Available settings: 0-16777215
Default setting: 255 Parameter size: 4 [bytes]
62. High temperature alarm indicator colour
Parameter stores RGB colour value (see the note below for details).
Available settings: 0-16777215
Default setting: 16711680 Parameter size: 4 [bytes]
i
NOTE
The main controller interprets colours as a sum of its component col-
ours value. Each colours value is a number from 0 to 255.
Indicated colour = 65536 * RED + 256 * GREEN + BLUE
Colour Decimal value
Red 16711680
Green 65280
Blue 255
Yellow 16776960
Turquoise 65535
Orange 16750848
White 16777215
Indicator turned o 0