FIBARO ROLLER SHUTTER 3 - Calibration Using Parameter; Slats Positioning in Venetian Blinds Mode

This parameter allows reversing the operation of Q1 and Q2 without changing the wiring (in
case of invalid motor connection) to ensure proper operation.
Size: 1 Byte, Default Value: 0
Setting
Description
0
default (Q1 – 1st channel, Q2 – 2nd channel)
1
reversed (Q1 – 2nd channel, Q2 – 1st channel)
Parameter 30: Alarm configuration - 1st slot
This parameter determines to which alarm frames and how the device should react. The
parameters consist of 4 bytes, three most significant bytes are set according to the official Z-
Wave protocol specification.
For a setting of this parameter, please refer to the manufacturer‘ s manual.
Size: 4 Byte, Default Value: 0
Setting
Description
Parameter 31: Alarm configuration - 2nd slot (Water)
This parameter determines to which alarm frames and how the device should react. The
parameters consist of 4 bytes, three most significant bytes are set according to the official Z-
Wave protocol specification.
For a setting of this parameter, please refer to the manufacturer‘ s manual.
Size: 4 Byte, Default Value:
Setting
Description
Parameter 32: Alarm configuration - 3rd slot (Smoke)
This parameter determines to which alarm frames and how the device should react. The
parameters consist of 4 bytes, three most significant bytes are set according to the official Z-
Wave protocol specification.
For a setting of this parameter, please refer to the manufacturer‘ s manual.
Size: 4 Byte, Default Value:
Setting
Description
Parameter 33: Alarm configuration - 4th slot (CO)
This parameter determines to which alarm frames and how the device should react. The
parameters consist of 4 bytes, three most significant bytes are set according to the official Z-
Wave protocol specification.For a setting of this parameter, please refer to the manufacturer‘ s
manual.