FIBARO ROLLER SHUTTER 3 Manual

For a setting of this parameter, please refer to the manufacturer‘ s manual.
Size: 4 Byte, Default Value:
Setting
Description
Parameter 35: Alarm configuration - 5th slot (Heat)
This parameter determines to which alarm frames and how the device should react. The
parameters consist of 4 bytes, three most significant bytes are set according to the official Z-
Wave protocol specification.
Size: 4 Byte, Default Value:
Setting
Description
Parameter 40: S1 switch - scenes sent
This parameter determines which actions result in sending scene IDs assigned to them.
Size: 1 Byte, Default Value: 0
Setting
Description
1
Key pressed 1 time
2
Key pressed 2 times
4
Key pressed 3 times
8
Key hold down and key released
15
All
Parameter 42: S2 switch - scenes sent
This parameter determines which actions result in sending scene IDs assigned to them.
Size: 1 Byte, Default Value: 0
Setting
Description
1
Key pressed 1 time
2
Key pressed 2 times
4
Key pressed 3 times
8
Key hold down and key released
15
All
Parameter 60: Measuring power consumed by the device itself
This parameter determines whether the power metering should include the amount of active
power consumed by the device itself.
Size: 1 Byte, Default Value: 0

FIBARO ROLLER SHUTTER 3 Specifications

General

Device Type	Roller Shutter Controller
Protocol	Z-Wave
Radio Protocol	Z-Wave
Dimensions	42.5 x 38.25 x 20.3 mm
Mounting Box Requirements	Ø ≥ 50mm, depth ≥ 60mm
Protection Class	IP20
Maximum Load for AC Output	4.2A
Max Transmit Power	up to 6 dBm
Range	Up to 50m (open space)
Operating Temperature	0°C to 40°C
Z-Wave Frequency	868.4 MHz EU
Compatibility	Works with various Z-Wave and Z-Wave Plus certified devices
Radio Frequency	868.4 or 908.4 or 921.4 MHz EU frequency band