FiberHome AN6001-G16 Manual

Tool
5.2
Installing the Equipment in a 19-inch Ca
b
Cross
screwdriver
Marker pen
Flat
screwdriver
M
Panel s
Fiber guide unit
Component
Mounting the Equipment in a Cabinet
The equipment can be mounted in a cabinet in three wa
y
and then mount the equipment; install the fiber guide slot
equipment in the cabinet.
(806000069)
Install the fiber guide
unit (optional).
1
screw
M3×4
Install the fib
slot in the ca
(optional).
2
screw
M3×4
Mark the mounting
holes for the equipment,
and install the floating
nuts.
1
3
Place the equipment horizontally into the cab
i
Add adapter
m
ears when in
s
equipment in
cabinet.
2
Procedure
6
Installing the Equipment in a 19-inch
Cabinet (4102596 to 4102599)
3
Install the panel screws to secure the equipm
e
figure below illustrates how to install the equi
p
a 19-inch cabinet as an example.
4
b
inet
M
6
cre
w
M3
Screw
Fiber
g
uide slot for a 19-inch cabinet
(
801000976
)
y
s as illustrated below: install the fiber guide unit
and then mount the equipment; directly mount the
Fiber guide slot for a 21-inch cabinet (801000932)
g
()
er guide
binet
Mount the equipment in
the cabinet directly.
3
screw
M3×4
i
net.
m
ounting
s
talling the
a 21-inch
Insert the cable plug completely
into the desired interface so that
the end face of the plug aligns
with the panel surface.
1
Correct Way to Install Screws
6
4
e
nt. The
p
ment in
Make sure that the screw
threads can get a good grip (the
resistance encountered is
small), and tighten the screw
with care.
2

FiberHome AN6001-G16 Specifications

General

Brand	FiberHome
Model	AN6001-G16
Category	Touch terminals
Language	English