MAINTENANCE
• For best performance, we recommend setting the temperature and allowing your heater to
run as much as possible. Electronic circuits should stay dry and warm with electricity.
• Clean your pool's filtration system regularly to avoid damage to the unit due to a dirty or
clogged filter.
• Winterize properly by making sure no water remains in the heater’s tank. If possible,
bring the unit inside during winter to minimize risks.
• After the unit is winterized, it is ideal to cover the unit with the special winter heat pump
cover.
• Please keep the coils clean, by using “Foaming air conditioner coil cleaner”, available at
hardware stores.
• Winterization: If the unit is not running during winter months, please disconnect
power supply and pipes, and let out drain water from unit by tilting the heater toward the
water inlet side by 45 degrees. A shop vac can also be used for this.
• Winterization: if you want to move the unit indoors, just disconnect everything and
take it into your garage.
V.23.02 FIBROPOOL USA
To Next Page
Loading...
