3 - 13
BIOS Setup
VIA OnChip PCI Device
VIA-3058 AC97 Audio
It allows users to disable AC97 link in South Bridge.
The options are: Auto, Disabled.
VIA-3068 MC97 Modem
It allows users to disable MC97 link in South Bridge.
The options are: Auto, Disabled.
Onboard FDC Controller
When enabled, the floppy diskette drive (FDD) controller is activated.
The options are: Enabled, Disabled.
Onboard Serial Port 1
If the serial port 1 uses the onboard I/O controller, you can modify your
serial port parameters. If an I/O card needs to be installed, COM3 and
COM4 may be needed. The options are: 3F8/IRQ4, 3E8/IRQ4, 2F8/IRQ3,
2E8/IRQ3, Disabled, Auto.
Onboard Serial Port 2
If the serial port 2 uses the onboard I/O controller, you can modify your
serial port parameters. If an I/O card needs to be installed, COM3 and
COM4 may be needed. The options are: 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3,
3F8/IRQ4, Disabled, Auto.
UART Mode Select
Allows you to select the IR modes if the serial port 2 is used as an IR port.
Set at Standard, if you use COM2 as the serial port as the serial port,
instead as an IR port. The options are: IrDA, ASKIR, Normal.
UR2 Duplex Mode
Allows you to select the IR modes.
The options are: Half, Full.
SuperIO PCI Device
To Next Page
Loading...
