FIC AM35 - Page 44

3 - 14
AM35 Mainboard Manual
Onboard Parallel Port
Allows you to select from a given set of parameters if the parallel port uses
the onboard I/O controller.
The options are: Disabled, 378/IRQ7, 278/IRQ5, 3BC/IRQ7.
Parallel Port Mode
Allows you to connect with an advanced printer via the port mode it
supports. The options are: SPP, EPP, ECP, ECP+EPP.
ECP Mode Use DMA
This feature allows you to select Direct Memory Access (DMA) channel if
the ECP mode selected. The options are: 1, 3.
Game Port Address
This feature allows you to select the game port address or disable it.
The options are: Disabled, 201, 209.
Midi Port Address
This feature allows you to select the Midi port address or disable it.
The options are: Disabled, 330, 300.
Midi Port IRQ
It allows you to select Midi IRQ if Midi is enabled.
The options are: 5, 10.
Init Display First
When you install a PCI VGA card on the board, this feature allows you to
select the first initiation of the monitor display from PCI or onboard AGP.
The options are: PCI Slot, AGP.
OnChip USB Controller
Disable this option if you are not using the onboard USB feature.
The options are: All Disabled, All Enabled, 1 USB Port, 2 USB Port.
USB Keyboard Support
When a USB keyboard is installed, please set at Enabled.
The options are: Disabled, Enabled.