3 - 18
AM35 Mainboard Manual
PowerOn by PCI Card
When set at Enabled, any PCI-PM event awakes the system from a PCI-
PM controlled state.
The options are Disabled, Enabled.
RTC Alarm Resume
Enabled allows you to set the time the system will be turned on from the
system power-off status. The options are: Enabled, Disabled.
PCI Master
To set this feature at ON activates that Power Management feautre (PM)
wake-up event for the PCI bus master card.
The options are: OFF, ON.
LPT & COM
When LPT/COM is selected, any access of LPT and COM ports will awake
the system. Likewise, either LPT or COM is chosen, the system will be
awaken by any activity of LPT or COM port.
The options are: LPT/COM, LPT, COM, NONE.
VGA
When set at On, any VGA activity will awake the system.
The options are: OFF, ON.
HDD & FDD
When it is set at ON, any access happened at hard drives and floppy
drives will awake the system. The options are: OFF, ON.
IRQ/Event Activity Detect
USB Resume From S3
When set at Enabled, it allows USB devices that linked with the system to
activate the system from ACPI S3 power saving mode.
The options are Disabled, Enabled.
Modem Ring Resume
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
The options are: Enabled, Disabled.
To Next Page
Loading...
